Graphic tile delivers the same kiln-fired porcelain enamel surface in a format designed to integrate directly into walls, plazas, and architectural systems. Frequently specified for public art and large-scale murals, it provides long-term color stability, chemical resistance, and durability while allowing expansive surface coverage with modular precision.
Graphic tile brings museum-grade color fidelity into permanent architectural construction.
Custom printed porcelain tile
Graphic tile is through-body porcelain tile with the artwork fused into a vitreous glass surface at over 1400°F. The image is not ink applied to the tile, not vinyl, not laminate, and not a coating sitting on the surface. It is glass, and it is part of the tile. That difference is why tile graphics fabricated this way stay colorfast through UV exposure, chlorine, and repeated cleaning, while surface-printed tile graphics shift and dull.
Artwork, photography, patterns, typography, maps, illustrations, and logos, at 300 LPI photographic resolution from a library of 20,000+ colors including iridescent finishes. File preparation requirements are published in our design specifications, and we review artwork with you before anything is fired.
Our ceramic color lab formulates to your color. Not to the nearest entry on a chart, and not to a standard we set for our own convenience.
That capability wins work on its own. We have been brought onto projects where the tile carried no graphics at all, plain fields of a brand color, because other fabricators could not reach the match and we could. A brand color that is close is a brand color that is wrong, and on a facade it is wrong permanently. Ceramic color is formulated, fired, and measured against your standard, then documented, so a reorder years later matches the original run.
The tile is through-body porcelain. The composition runs the full thickness of the tile, so a chip, a drilled penetration, or a cut edge does not expose a contrasting core the way a glazed tile does. Porcelain also sits in the lowest water absorption class in the tile standard, which is what carries it through pools, fountains, freeze-thaw exposure, and continuously wet interiors.
UV-cured printing places an organic ink layer on top of an already finished tile. Two things follow from that chemistry. Color accuracy is bounded by what the ink set can physically reach, which is why exact brand matching is difficult and why matched reorders drift. And because the ink is an organic coating exposed at the surface, it behaves like every organic coating under sustained UV, abrasion, and chemical cleaning.
Porcelain enamel is not a coating. Ceramic color is fused into a glass surface at over 1400°F, so there is no applied layer to chalk, scratch through, or lose. That is what the 25-year warranty against fading, discoloration, and gloss reduction is written against, and it is backed by installations performing beyond 30 years in the field.
Grid layout follows the artwork. A large-scale tile mural is set across a regular field so image continuity holds across grout lines. Accent and border work uses smaller modules to follow architectural detail. Because the format is modular, a single tile can be replaced without refabricating the installation.
Standard module
12 x 12 inches
The default field size for tile murals and architectural walls.
Scaled up to
3 x 3 feet
Fewer grout lines across broad, continuous imagery.
Scaled down to
1 x 1 inch
Fine mosaic detail, borders, and historical matching.
Tile is also waterjet cut to non-standard shapes when the design calls for a geometry a square grid cannot carry.
Architectural tile murals, transit corridors, civic lobbies, hospitality interiors, and exterior walls. Graphic tile installs within standard tile-setting systems, so the trade setting the rest of the tile can set it.
Floor installations are produced regularly. Slip resistance requirements vary by jurisdiction and application, and that determination belongs to your design team. Specify floor testing to your project’s requirements.
Through-body porcelain suits pools, fountains, and continuously wet environments, where a glaze layer over a different body is the point that fails first.
Outdoor tile murals are the material’s strongest case. Exterior graphics hold color through UV exposure, freeze-thaw cycling, and graffiti removal chemicals. See installed work in public art and murals, across transportation and transit, and throughout the graphic tile portfolio.
We assess the files against the finished size, module layout, and grout line placement.
Our ceramic color lab formulates to your specified standard and documents it for reorders.
You approve a fired proof. What you sign off on is what fires in production.
Glass is fused to the porcelain body at over 1400°F in our Tumwater facility.
Every tile is checked against the approved proof for color, registration, and surface.
Tiles are mapped and labeled to the installation grid so the setter works from a keyed layout.
Every tile is fabricated and kiln-fired in house. All products are made in the United States. Named work includes the Round Top courthouse tile mural in Texas, “Wheels” by Anne Marie Karlsen in Santa Monica, the Cityplace Station restoration for DART, and the Amtrak station in Tacoma. Winsor Fireform is a member of the Tile Council of North America. Full technical data is published in our material specifications.
Stock tile ships from inventory at volume pricing and on a shorter schedule. Made-to-order fabrication is a different commitment, and it is the right one when the color, the image, or the service life has to be exact.